雙壁波紋管是采用兩臺單螺桿擠出機塑化擠出物料，經復合機頭將物料擠出并形成壁厚均勻的同心胚管，進入成型機內與模塊組合成腔。在外層與模塊之間抽真空，使外層緊貼模塊，同時在內層與外層之間填充壓縮空氣，使波峰處的內外層分離，在定徑棒和模塊的作用下，使波谷處的內外層壓合，從而形成內壁平滑，外壁凹凸的雙層波紋管。
雙壁波紋管按材質分PVC和PE兩大類。 |
Dual Wall Bellows may adopt two sets of single screw extruding machine in plasticizing and extruding materials,extrude materials through the composite head and form the concentric embryonic pipe with uniform wall thickness,enter into the shaping machine to form a cavity in combination with the module.Evacuate the air between the exterior layer and module,make the exterior layer cling to the exterior and the interior,make the exterior layer separated form the module on the position of wave ridge,under the effection of sizing diameter bar and module,make the exterior/interior layers laminated on the position of wave trough,and then form the dual wall bellows with smooth wall on the interior,concave and convex on the exterior wall.
Dual wall bellows may be divided into two primary categories as PVC and PE.
|
項目
Item |
指標 Indicators |
| PVC |
PE |
環鋼度
Ring Rigidity
KN/m2 |
S1 |
≥4.0 |
≥4.0 |
| S2 |
≥8.0 |
≥8.0 |
沖擊性能（TIR）,%
Impact Properties(TIR),%
Flexible ring |
≤10 |
≤10 |
環柔性
Ring Flexibility |
式樣圓滑，無破裂，兩壁無脫裂
Testing Sample is smooth,no cracking ,and no splitting on both walls. |
式樣圓滑，無破裂，兩壁無脫裂
Testing Sample is smooth,no cracking ,and no splitting on both walls. |
烘箱實驗
Drying Oven Test |
無分層，無開裂和氣泡
no layering,no cracking and air bubble |
無分層，無開裂和氣泡
no layering,no cracking and air bubble |
蠕變率
Creep Rate |
≤2.5 |
≤4 |
接點滲漏
Contaction Point Leakage |
無破裂，無滲漏
no cracking,no leakage |
無破裂，無滲漏
no cracking,no leakage |
扁平試驗
Flattening Test |
壓扁至外徑1/2無破裂，兩壁無脫開
No cracking when flattining it to 1/2 of the exterior diameter,no detachment on both walls. |
-- |
二氯甲烷浸漬
Methylene Chloride Impregnation |
外壁無分離，表面變化不劣于L
No separating on the exterior wall,surface changing dose not compare unfavourably with L |
-- |
|
1、材質新穎，結構合理，強度高，抗壓耐沖擊性好；
2、內壁光滑，不結垢，流通量大，同流量使用口徑小；
3、一般情況下，排管不需要做混凝土基礎，施工速度快；
4、橡膠圈承接連接，接頭密封好，方法可靠；
5、質量輕，搬運、安裝方便，無須機械；
6、柔性接口，抗不均勻性沉降強；
7、耐酸堿等許多介質的腐蝕，使用范圍在PH值為2-12之間；
8、使用壽命長，大于50年。 |
1.Materials is new,structure is resonable,high strength,excellent compressive strength and impact resistance;
2.The interior wall is smooth,no scaling formation,throughput capacity is larger,and using diameter is smaller under the same throughput capacity;
3.As for the normal situations,no necessary to use concrete as the base when arranging pipes,construction speed is fast;
4.Use rubber ring socket and spigot joint,the joint sealing is good,and method is reliable;
5.Light in weight,it is convenient for carrying and installation,no necessary to use machine;
6.Flexible connector,strong capacity of resisting uneven settlement;
7.Endure the corrosion of various mediums as acid and alkaline etc,;PH value of using range is between 2 and 12;
8.Long using life,is over 50 years. |
HDPE雙壁波紋管尺寸
HDPE Dual Wall Bellows Size |
公稱內徑mm
Nominal diameter
|
最小平均內經mm
Minimum Average diameter
|
| 100 |
95 |
| 125 |
120 |
| 150 |
145 |
| 200 |
195 |
| 225 |
220 |
| 250 |
245 |
| 300 |
294 |
| 400 |
392 |
| 500 |
490 |
| 600 |
588 |
| 800 |
785 |
| 1000 |
985 |
| 1200 |
1185 |
|
PVC-U雙壁波紋管尺寸
PVC-U Dual Wall Bellows Size |
公稱內徑mm
Nominal diameter
|
最小平均內經mm
Minimum Average diameter |
| 110 |
97 |
| 125 |
107 |
| 140 |
118 |
| 160 |
135 |
| 180 |
155 |
| 200 |
172 |
| 225 |
191 |
| 250 |
216 |
| 280 |
243 |
| 315 |
270 |
| 355 |
310 |
| 400 |
340 |
| 450 |
383 |
| 500 |
432 |
| 560 |
486 |
| 630 |
540 |
|
|
市政建設、住宅小區地下水排水、排污管道；高速公路、地鐵預埋管道；高壓電纜、郵電通訊電纜護套；港口、石油、化工、礦山用于流體的輸送以及農田水利灌溉輸送等。 |
Municipal construction,rainwater drainage and pollution discharge pipe for housing estate;pre-buried pipes for expressway and metro;protective casing pipe for high-voltage cable,post & telecommunications;liquid transportiing pipes for port,petroleum,chemical industry,mine;agricultural irrigation transporting pipes etc. |
